Guangzhou Kebao insulation products Co., Ltd.
Русский
Thin Wall Shrink Tube
KB-TW(YG)Yellow green shrink tube
Material: cross-linked modified polyolefin
Operating temperature:-55℃~125℃
Minimum shrink temperature: 70℃
Minimum fully recovery temperature: 120℃
Shrink ratio: 2:1
Features:
• halogen-free environment, low smoke, the product complies “RoHS”, “REACH”,
• soft, flexible
• UL224 VW-1 flammability
• Excellent insulation, heat resistance and voltage performance.
Application:
widely used in electronics, subways,buildings, public facilities and so on.
| Test Items | Test Methods | Performance |
| Length Rate Of Change | ASTM D2671 | -5%~+5% |
| Tensile Strength | ASTM D638 | ≥10.4MPa |
| Breaking Elongation | ASTM D638 | ≥200% |
| Hot Air Aging Test | 158.0°C/168h | – |
| Thermal aging Tensile strength | ASTM D638 | ≥7.3MPa |
| Heat Aging Breaking elongation | ASTM D638 | ≥100% |
| Voltage Level | UL224 | 300V/600V |
| Volume Resistivity | ASTM D2671 | ≥1.0×10¹² · cm |
| Breakdown Voltage | UL224 | 2500V(60s)No Breakdown |
| Thermal Shock | UL224/250°C±3°C/4h | Does not drip, Does not flow, Does not crack |
| Size | Dimension before shrinkage（mm） | Dimension After shrinked（mm） | ||
| Diameter（D） | Wall Thickness（T） | Diameter（d） | Wall Thickness（t） | |
| Ф2.0 | 2.5+0.2/-0.1 | 0.20±0.05 | ≤1.00 | 0.42±0.08 |
| Ф2.5 | 3.0+0.2/-0.1 | 0.22±0.05 | ≤1.25 | 0.46±0.08 |
| Ф3.0 | 3.5+0.2/-0.1 | 0.22±0.05 | ≤1.50 | 0.46±0.08 |
| Ф3.5 | 4.0+0.2/-0.1 | 0.22±0.05 | ≤1.75 | 0.46±0.08 |
| Ф4.0 | 4.6+0.2/-0.1 | 0.22±0.05 | ≤2.00 | 0.46±0.08 |
| Ф4.5 | 5.0+0.2/-0.1 | 0.23±0.05 | ≤2.25 | 0.46±0.08 |
| Ф5.0 | 5.5+0.2/-0.1 | 0.25±0.05 | ≤2.50 | 0.50±0.08 |
| Ф5.5 | 6.0+0.2/-0.1 | 0.25±0.05 | ≤2.75 | 0.50±0.08 |
| Ф6.0 | 6.5+0.2/-0.1 | 0.25±0.05 | ≤3.00 | 0.55±0.10 |
| Ф6.5 | 6.9+0.2/-0.1 | 0.25±0.05 | ≤3.25 | 0.55±0.10 |
| Ф7.0 | 7.5+0.2/-0.1 | 0.25±0.05 | ≤3.50 | 0.55±0.10 |
| Ф8.0 | 8.5+0.3/-0.1 | 0.28±0.06 | ≤4.00 | 0.58±0.10 |
| Ф9.0 | 9.5+0.2/-0.1 | 0.28±0.06 | ≤4.50 | 0.58±0.10 |
| Ф10 | 10.5+0.3/-0.1 | 0.28±0.06 | ≤5.00 | 0.58±0.10 |
| Ф11 | 11.5+0.3/-0.1 | 0.28±0.06 | ≤5.50 | 0.58±0.10 |
| Ф12 | 12.5+0.3/-0.1 | 0.28±0.06 | ≤6.00 | 0.58±0.10 |
| Ф13 | 13.5+0.3/-0.1 | 0.28±0.06 | ≤6.50 | 0.58±0.10 |
| Ф14 | 14.5+0.3/-0.1 | 0.28±0.06 | ≤7.00 | 0.58±0.10 |
| Ф15 | 15.5+0.3/-0.1 | 0.28±0.06 | ≤7.50 | 0.58±0.10 |
| Ф16 | 16.5+0.3/-0.1 | 0.28±0.06 | ≤8.00 | 0.58±0.10 |
| Ф17 | 17.5+0.3/-0.1 | 0.28±0.06 | ≤8.50 | 0.58±0.10 |
| Ф18 | 18.5+0.3/-0.1 | 0.32±0.08 | ≤9.00 | 0.68±0.10 |
| Ф20 | 20.6+0.5/-0.2 | 0.32±0.08 | ≤10.0 | 0.68±0.10 |
| Ф22 | 22.6+0.7/-0.2 | 0.35±0.08 | ≤11.0 | 0.72±0.12 |
| Ф25 | 25.6+0.7/-0.2 | 0.40±0.10 | ≤12.5 | 0.78±0.12 |
| Ф28 | 28.6+0.7/-0.2 | 0.40±0.10 | ≤14.0 | 0.78±0.12 |
| Ф30 | 30.6+0.7/-0.2 | 0.40±0.10 | ≤15.0 | 0.82±0.12 |
| Ф35 | 35.6+0.7/-0.2 | 0.45±0.10 | ≤17.5 | 0.92±0.12 |
| Note: Other sizes and colors can be available upon request | ||||
| Test Items | Test Methods | Performance |
| Length Rate Of Change | ASTM D2671 | -5%~+5% |
| Tensile Strength | ASTM D638 | ≥10.4MPa |
| Breaking Elongation | ASTM D638 | ≥200% |
| Hot Air Aging Test | 158.0°C/168h | – |
| Thermal aging Tensile strength | ASTM D638 | ≥7.3MPa |
| Heat Aging Breaking elongation | ASTM D638 | ≥100% |
| Voltage Level | UL224 | 300V/600V |
| Volume Resistivity | ASTM D2671 | ≥1.0×10¹² · cm |
| Breakdown Voltage | UL224 | 2500V(60s)No Breakdown |
| Thermal Shock | UL224/250°C±3°C/4h | Does not drip, Does not flow, Does not crack |
| Size | Dimension before shrinkage（mm） | Dimension After shrinked（mm） | ||
| Diameter（D） | Wall Thickness（T） | Diameter（d） | Wall Thickness（t） | |
| Ф2.0 | 2.5+0.2/-0.1 | 0.20±0.05 | ≤1.00 | 0.42±0.08 |
| Ф2.5 | 3.0+0.2/-0.1 | 0.22±0.05 | ≤1.25 | 0.46±0.08 |
| Ф3.0 | 3.5+0.2/-0.1 | 0.22±0.05 | ≤1.50 | 0.46±0.08 |
| Ф3.5 | 4.0+0.2/-0.1 | 0.22±0.05 | ≤1.75 | 0.46±0.08 |
| Ф4.0 | 4.6+0.2/-0.1 | 0.22±0.05 | ≤2.00 | 0.46±0.08 |
| Ф4.5 | 5.0+0.2/-0.1 | 0.23±0.05 | ≤2.25 | 0.46±0.08 |
| Ф5.0 | 5.5+0.2/-0.1 | 0.25±0.05 | ≤2.50 | 0.50±0.08 |
| Ф5.5 | 6.0+0.2/-0.1 | 0.25±0.05 | ≤2.75 | 0.50±0.08 |
| Ф6.0 | 6.5+0.2/-0.1 | 0.25±0.05 | ≤3.00 | 0.55±0.10 |
| Ф6.5 | 6.9+0.2/-0.1 | 0.25±0.05 | ≤3.25 | 0.55±0.10 |
| Ф7.0 | 7.5+0.2/-0.1 | 0.25±0.05 | ≤3.50 | 0.55±0.10 |
| Ф8.0 | 8.5+0.3/-0.1 | 0.28±0.06 | ≤4.00 | 0.58±0.10 |
| Ф9.0 | 9.5+0.2/-0.1 | 0.28±0.06 | ≤4.50 | 0.58±0.10 |
| Ф10 | 10.5+0.3/-0.1 | 0.28±0.06 | ≤5.00 | 0.58±0.10 |
| Ф11 | 11.5+0.3/-0.1 | 0.28±0.06 | ≤5.50 | 0.58±0.10 |
| Ф12 | 12.5+0.3/-0.1 | 0.28±0.06 | ≤6.00 | 0.58±0.10 |
| Ф13 | 13.5+0.3/-0.1 | 0.28±0.06 | ≤6.50 | 0.58±0.10 |
| Ф14 | 14.5+0.3/-0.1 | 0.28±0.06 | ≤7.00 | 0.58±0.10 |
| Ф15 | 15.5+0.3/-0.1 | 0.28±0.06 | ≤7.50 | 0.58±0.10 |
| Ф16 | 16.5+0.3/-0.1 | 0.28±0.06 | ≤8.00 | 0.58±0.10 |
| Ф17 | 17.5+0.3/-0.1 | 0.28±0.06 | ≤8.50 | 0.58±0.10 |
| Ф18 | 18.5+0.3/-0.1 | 0.32±0.08 | ≤9.00 | 0.68±0.10 |
| Ф20 | 20.6+0.5/-0.2 | 0.32±0.08 | ≤10.0 | 0.68±0.10 |
| Ф22 | 22.6+0.7/-0.2 | 0.35±0.08 | ≤11.0 | 0.72±0.12 |
| Ф25 | 25.6+0.7/-0.2 | 0.40±0.10 | ≤12.5 | 0.78±0.12 |
| Ф28 | 28.6+0.7/-0.2 | 0.40±0.10 | ≤14.0 | 0.78±0.12 |
| Ф30 | 30.6+0.7/-0.2 | 0.40±0.10 | ≤15.0 | 0.82±0.12 |
| Ф35 | 35.6+0.7/-0.2 | 0.45±0.10 | ≤17.5 | 0.92±0.12 |
| Note: Other sizes and colors can be available upon request | ||||
Previous:
KB-TW(P)Thin Wall Tube Rigid
Give Us A Message