Guangzhou Kebao insulation products Co., Ltd.
">
Guangzhou Kebao insulation products Co., Ltd.
150 °C · 3:1 / 4:1 · −40 to 150 °C
Catalog code: KB-DW(150)
KB-DW(150) is a 150 degree heat shrink tubing with a dual-wall, adhesive-lined construction, designed to insulate and seal automotive wire connectors and assemblies made by ultrasonic welding, pinch dipping or soldering. Typical applications are sealing joints in the under-bonnet environment of automobiles.
The adhesive forms an excellent barrier to moisture and automotive fluids and provides exceptional corrosion protection.
| Shrink ratio3:1 / 4:1 | Operating temp.−40 to 150 °C | Full recovery135 °C |
Outer jacket operating temperature is −40 to 150 °C; minimum shrink temperature is 110 °C and full recovery is 135 °C.
| Property | Requirement | Test method | Typical data |
| Longitudinal shrinkage | −10 to 0% | ASTM D2671 | — |
| Tensile strength | ≥10.4 MPa | ASTM D2671 | — |
| Ultimate elongation | ≥200% | ASTM D2671 | — |
| Heat shock (250 °C / 4 h) | No drip, flow or crack | ASTM D2671 | — |
| Tensile strength after ageing | ≥10.4 MPa | ASTM D2671 | — |
| Dielectric strength | ≥19.7 kV/mm | ASTM D2671 | — |
| Volume resistivity | ≥1×10¹² Ω·cm | ASTM D257 | — |
| Flammability | Self-extinguishing ≤10 s | ISO 6722 | — |
Standard sizes
| Size (mm) | ID as supplied (mm) | ID after recovered (mm) | Wall thickness (mm) | Adhesive thickness (mm) |
| 5.1 | 5.1 | 1.3 | 1.4 | 0.76 |
| 7.6 | 7.6 | 1.7 | 1.52 | 0.76 |
| 9.0 | 9.0 | 2.3 | 1.52 | 0.76 |
| 11.6 | 11.6 | 2.5 | 2.29 | 1.40 |
| 17.8 | 17.8 | 4.4 | 2.54 | 1.52 |
| 27.9 | 27.9 | 8.4 | 2.50 | 1.50 |
Other sizes are available upon request.
Choose a 150 degree heat shrink tubing size whose recovered inside diameter is slightly smaller than the component you are sealing, so the adhesive compresses into a positive seal. Slide the tubing over the joint, then heat evenly with a heat gun until the tubing fully recovers and a small bead of adhesive appears at both ends. Allow the assembly to cool completely before flexing or energising.
The outer jacket operates from −40 to 150 °C, suitable for high-temperature under-bonnet areas.
It is the direct functional equivalent of TE Raychem SCT: semi-rigid adhesive-lined, −40 to 150 °C. Sizes 5.1 / 7.6 / 9.0 / 11.6 / 17.8 / 27.9 mm correspond to SCT No.0 through No.5.
Give Us A Message