">

Guangzhou Kebao insulation products Co., Ltd.




Русский
  • English
  • España
  • Français
  • Русский

Dual Wall Shrink Tube

Military shrink tube with glue

Wire harness white glue heat shrink tube · 4:1
White wall · flame-retarded hot-melt adhesive
−40 to 125 °C · automotive harness sealing.

Military grade · 2:1 / 3:1 / 4:1 · −55 to 110 °C

Catalog code: KB-DW(M)

KB-DW(M) is a military-grade, dual-wall heat shrink tubing with a crosslinked polyolefin outer wall and a hot-melt adhesive inner lining. It is designed for the oil and gas path of vehicles and for harsh-environment protection where sealing, oil resistance and flame retardancy are critical.

The tubing meets SAE-AMS-DTL-23053/4 standards and offers low smoke, good flexibility and excellent oil and chemical resistance across a wide operating temperature range.

Shrink ratio2:1 / 3:1 / 4:1 Operating temp.−55 to 110 °C StandardSAE-AMS-DTL-23053/4

Military Dual Wall Heat Shrink Tubing applications

  • Automotive wiring harness in harsh environments
  • Oil and fuel line protection
  • Military and aerospace cable sealing
  • Environmental sealing of splices and terminations

Key characteristics

  • Excellent oil and chemical resistance
  • Low smoke, flame retardant
  • Meets SAE-AMS-DTL-23053/4 standards
  • Good flexibility with hot-melt adhesive sealing

Continuous operating temperature is −55 to 110 °C; shrink temperature is 100–140 °C.

Military Shrink Tube with Glue specifications

Property Requirement Test method Typical data
Tensile strength ≥10.4 MPa ASTM D638 14.1 MPa
Elongation at break ≥200% ASTM D638 329%
Cutting modulus ≤172 MPa ASTM D882 (2%) 153 MPa
Heat shock (250 ±3 °C / 4 h) No drip, flow or crack — Qualified
Cold shock (−55 ±2 °C) No cracking ASTM D745 Qualified
Dielectric strength ≥19.7 kV/mm ASTM D2671 26 kV/mm
Volume resistivity ≥1×10¹² Ω·cm ASTM D876 3.6×10¹³
Thermal ageing (175 °C / 168 h) No drip, no crack — Qualified
Tensile strength after ageing ≥6.9 MPa ASTM D638 9.5 MPa
Dielectric strength after ageing ≥15.8 kV/mm ASTM D2671 24 kV/mm

Standard sizes

Size ID as supplied (mm) ID after recovered (mm) Wall thickness (mm) Adhesive thickness (mm)
3:1 · 1/8 3.2 1.00 0.85 0.35
3:1 · 3/16 4.7 1.50 1.05 0.45
3:1 · 1/4 6.4 2.00 1.10 0.45
3:1 · 3/8 9.5 3.00 1.45 0.45
3:1 · 1/2 12.7 4.00 1.50 0.45
3:1 · 3/4 19.1 6.00 2.00 0.65
3:1 · 1 25.4 8.40 2.00 0.65
3:1 · 1-1/4 30.0 10.0 2.20 0.75
3:1 · 1-1/2 40.0 13.7 2.50 1.00
4:1 · 4/1 4.0 1.00 1.00 0.50
4:1 · 8/2 8.0 2.00 1.10 0.50
4:1 · 12/3 12.0 3.00 1.40 0.61
4:1 · 16/4 16.0 4.00 1.78 0.76
4:1 · 24/6 24.0 6.00 2.25 0.76
4:1 · 32/8 32.0 8.00 2.54 1.02

Other sizes are available upon request.

How to select and install Military Dual Wall Heat Shrink Tubing

Choose a military dual wall heat shrink tubing size whose recovered inside diameter is slightly smaller than the component you are sealing, so the adhesive compresses into a positive seal. Slide the tubing over the joint, then heat evenly with a heat gun until the tubing fully recovers and a small bead of adhesive appears at both ends. Allow the assembly to cool completely before flexing or energising.

Frequently asked questions

What standard does it meet?

SAE-AMS-DTL-23053/4, with low smoke and flame-retardant performance for demanding installations.

Can it be used on fuel and oil lines?

Yes — it has excellent oil and chemical resistance and is designed for the vehicle oil and gas path.

Related dual wall shrink tubes



Give Us A Message

* Name
Tel
* Email
* Message