Guangzhou Kebao insulation products Co., Ltd.
Русский
Thin Wall Shrink Tube
KB-TW(3X) 3X 4X Normal thin wall shrink tube
Material: cross-linked modified polyolefin
Operating temperature:-55℃~125℃
Minimum shrink temperature: 70℃
Minimum fully recovery temperature: 120℃
Shrink ratio: 3:1 4:1
Features:
• halogen-free environment, low smoke, the product complies “RoHS”, “REACH”,
• soft, flexible
• UL224 VW-1 flammability
• Excellent insulation, heat resistance and voltage performance.
Application:
widely used in electronics, subways,buildings, public facilities and so on.
| Test Items | Test Methods | Performance |
| Temperature Rating | UL224 | 125℃ |
| Length Rate Of Change | ASTM D2671 | -5%∼+5% |
| Tensile Strength | ASTM D638 | ≥10.4MPa |
| Breaking Elongation | ASTM D638 | ≥200% |
| Hot Air Aging Test | 158.0∘C/168∼h | – |
| Thermal aging Tensile strength | ASTM D638 | ≥7.3MPa |
| Heat Aging Breaking elongation | ASTM D638 | ≥100% |
| Voltage Level | UL224 | 300V/600V |
| Volume Resistivity | ASTM D2671 | ≥1.0×1012·cm |
| Breakdown Voltage | UL224 | 2500V(60s)No Breakdown |
| Thermal Shock | UL224/250∘C±3∘C/4∼h | Does not drip,Does not flow, Does not crack |
| With heart | ASTM D2671 | ≥70% |
| Specification | Dimension before shrinkage (mm) | Dimension after full contraction (mm) | ||
| Diameter(D) | Thickness(T) | Diameter (d) | Thickness (t) | |
| Φ1.5 | 2.0±0.5 | 0.18±0.08 | ≤0.50 | 0.40±0.10 |
| Φ3.0 | 3.5±0.5 | 0.20±0.08 | ≤1.00 | 0.55±0.10 |
| Φ4.5 | 5.0±0.5 | 0.20±0.08 | ≤1.50 | 0.55±0.10 |
| Φ6.0 | 6.5±0.5 | 0.22±0.10 | ≤2.00 | 0.60±0.10 |
| Φ9.0 | 9.5±0.5 | 0.25±0.10 | ≤3.00 | 0.70±0.10 |
| Φ12 | 12.5±0.5 | 0.25±0.10 | ≤4.00 | 0.70±0.10 |
| Φ15 | 15.5±0.5 | 0.25±0.10 | ≤5.00 | 0.70±0.10 |
| Φ18 | 18.5±0.5 | 0.30±0.12 | 00.95 | 0.80±0.20 |
| Φ24 | 24.5±0.5 | ≤8.00 | 1.00±0.20 | |
| Φ30 | 30.5±0.5 | ≤10.0 | 1.00±0.20 | |
| Φ33 | 33.5±0.5 | 0.36±0.15 | ≤11.0 | 1.00±0.20 |
| Φ39 | 39.5±0.5 | 0.45±0.15 | ≤13.0 | 1.25±0.20 |
| Φ50 | 51.0±1.0 | 0.50±0.15 | ≤16.7 | 1.50±0.20 |
| Note: Other sizes and colors can be available upon request | ||||
| 4:1 | ||||
| Size | Dimension before shrinkage (mm) | Dimension after full recovery (mm) | ||
| Diameter (D) | Thickness (T) | Diameter (d) | Thickness (t) | |
| Φ8.0 | 8.5±0.5 | 0.30±0.15 | ≤2.00 | 0.95±0.15 |
| Φ10 | 10.5±0.5 | 0.30±0.15 | ≤2.50 | 1.00±0.15 |
| Φ12 | 12.5±0.5 | 0.30±0.15 | ≤3.00 | 1.00±0.15 |
| Φ16 | 16.5±0.5 | 0.30±0.15 | ≤4.00 | 1.00±0.15 |
| Φ18 | 18.5±0.5 | 0.30±0.15 | ≤4.50 | 1.00±0.15 |
| Φ20 | 20.5±0.5 | 0.30±0.15 | ≤5.00 | 1.00±0.15 |
| Note: Other sizes and colors can be available upon request | ||||
| Test Items | Test Methods | Performance |
| Temperature Rating | UL224 | 125℃ |
| Length Rate Of Change | ASTM D2671 | -5%∼+5% |
| Tensile Strength | ASTM D638 | ≥10.4MPa |
| Breaking Elongation | ASTM D638 | ≥200% |
| Hot Air Aging Test | 158.0∘C/168∼h | – |
| Thermal aging Tensile strength | ASTM D638 | ≥7.3MPa |
| Heat Aging Breaking elongation | ASTM D638 | ≥100% |
| Voltage Level | UL224 | 300V/600V |
| Volume Resistivity | ASTM D2671 | ≥1.0×1012·cm |
| Breakdown Voltage | UL224 | 2500V(60s)No Breakdown |
| Thermal Shock | UL224/250∘C±3∘C/4∼h | Does not drip,Does not flow, Does not crack |
| With heart | ASTM D2671 | ≥70% |
| Specification | Dimension before shrinkage (mm) | Dimension after full contraction (mm) | ||
| Diameter(D) | Thickness(T) | Diameter (d) | Thickness (t) | |
| Φ1.5 | 2.0±0.5 | 0.18±0.08 | ≤0.50 | 0.40±0.10 |
| Φ3.0 | 3.5±0.5 | 0.20±0.08 | ≤1.00 | 0.55±0.10 |
| Φ4.5 | 5.0±0.5 | 0.20±0.08 | ≤1.50 | 0.55±0.10 |
| Φ6.0 | 6.5±0.5 | 0.22±0.10 | ≤2.00 | 0.60±0.10 |
| Φ9.0 | 9.5±0.5 | 0.25±0.10 | ≤3.00 | 0.70±0.10 |
| Φ12 | 12.5±0.5 | 0.25±0.10 | ≤4.00 | 0.70±0.10 |
| Φ15 | 15.5±0.5 | 0.25±0.10 | ≤5.00 | 0.70±0.10 |
| Φ18 | 18.5±0.5 | 0.30±0.12 | 00.95 | 0.80±0.20 |
| Φ24 | 24.5±0.5 | ≤8.00 | 1.00±0.20 | |
| Φ30 | 30.5±0.5 | ≤10.0 | 1.00±0.20 | |
| Φ33 | 33.5±0.5 | 0.36±0.15 | ≤11.0 | 1.00±0.20 |
| Φ39 | 39.5±0.5 | 0.45±0.15 | ≤13.0 | 1.25±0.20 |
| Φ50 | 51.0±1.0 | 0.50±0.15 | ≤16.7 | 1.50±0.20 |
| Note: Other sizes and colors can be available upon request | ||||
| 4:1 | ||||
| Size | Dimension before shrinkage (mm) | Dimension after full recovery (mm) | ||
| Diameter (D) | Thickness (T) | Diameter (d) | Thickness (t) | |
| Φ8.0 | 8.5±0.5 | 0.30±0.15 | ≤2.00 | 0.95±0.15 |
| Φ10 | 10.5±0.5 | 0.30±0.15 | ≤2.50 | 1.00±0.15 |
| Φ12 | 12.5±0.5 | 0.30±0.15 | ≤3.00 | 1.00±0.15 |
| Φ16 | 16.5±0.5 | 0.30±0.15 | ≤4.00 | 1.00±0.15 |
| Φ18 | 18.5±0.5 | 0.30±0.15 | ≤4.50 | 1.00±0.15 |
| Φ20 | 20.5±0.5 | 0.30±0.15 | ≤5.00 | 1.00±0.15 |
| Note: Other sizes and colors can be available upon request | ||||
Give Us A Message