Guangzhou Kebao insulation products Co., Ltd.
Русский
Thin Wall Shrink Tube
KB-TW(300V)Ultra Thin Wall Heat Shrink Tube
Material: cross-linked modified polyolefin
Operating temperature:-55℃~125℃
Minimum shrink temperature: 70℃
Minimum fully recovery temperature: 120℃
Shrink ratio: 2:1
Features:
• halogen-free environment, low smoke, the product complies “RoHS”, “REACH”,
• soft, flexible
• UL224 VW-1 flammability 300V
• Excellent insulation, heat resistance and voltage performance.
Application:
widely used in electronics, subways,buildings, public facilities and so on.
| Test Items | Test Methods | Performance |
| Temperature Rating | UL224 | 125℃ |
| Length Rate Of Change | ASTM D2671 | -5%~+5% |
| Tensile Strength | ASTM D638 | ≥10.4MPa |
| Breaking Elongation | ASTM D638 | ≥200% |
| Hot Air Aging Test | 158.0℃/168h | – |
| Thermal aging Tensile strength | ASTM D638 | ≥7.3MPa |
| Heat Aging Breaking elongation | ASTM D638 | ≥100% |
| Voltage Level | UL224 | 300V/600V |
| Volume Resistivity | ASTM D2671 | ≥1.0×1012·cm |
| Breakdown Voltage | UL224 | 2500V(60s)No Breakdown |
| Thermal Shock | UL224/250℃±3℃/4h | Does not drip, Does not flow, Does not crack |
| With heart | ASTM D2671 | ≥70% |
| Specification | Dimension before shrinkage (mm) | Dimension after full contraction (mm) | ||
| Diameter (D) | Thickness (T) | Diameter (d) | Thickness (t) | |
| Φ0.6 | 0.8+0.2/-0.1 | 0.15±0.05 | ≤0.35 | 0.25±0.06 |
| Φ0.7 | 0.9+0.2/-0.1 | 0.13±0.05 | ≤0.40 | 0.25±0.06 |
| Φ0.8 | 1.2+0.2/-0.1 | 0.13±0.05 | ≤0.45 | 0.25±0.06 |
| Φ1.0 | 1.3+0.2/-0.1 | 0.13±0.05 | ≤0.60 | 0.25±0.06 |
| Φ1.5 | 2.0+0.2/-0.1 | 0.13±0.05 | ≤0.80 | 0.25±0.06 |
| Φ2.0 | 2.5+0.2/-0.1 | 0.13±0.05 | ≤1.00 | 0.25±0.06 |
| Φ2.5 | 3.0+0.2/-0.1 | 0.13±0.05 | ≤1.25 | 0.28±0.06 |
| Φ3.0 | 3.5+0.2/-0.1 | 0.13±0.05 | ≤1.50 | 0.30±0.06 |
| Φ3.5 | 4.0+0.2/-0.1 | 0.15±0.05 | ≤1.75 | 0.30±0.06 |
| Φ4.0 | 4.5+0.2/-0.1 | 0.15±0.05 | ≤2.00 | 0.30±0.06 |
| Φ4.5 | 5.0+0.2/-0.1 | 0.15±0.05 | ≤2.25 | 0.30±0.06 |
| Φ5.0 | 5.5+0.2/-0.1 | 0.15±0.05 | ≤2.50 | 0.30±0.06 |
| Φ6.0 | 6.5+0.2/-0.1 | 0.15±0.05 | ≤3.00 | 0.30±0.06 |
| Φ7.0 | 7.5+0.3/-0.1 | 0.15±0.05 | ≤3.50 | 0.32±0.06 |
| Φ8.0 | 8.5+0.3/-0.1 | 0.15±0.05 | ≤4.00 | 0.32±0.06 |
| Φ9.0 | 9.5+0.3/-0.1 | 0.16±0.05 | ≤4.50 | 0.34±0.06 |
| Φ10 | 10.5+0.3/-0.1 | 0.16±0.05 | ≤5.00 | 0.34±0.06 |
| Φ12 | 12.5+0.3/-0.1 | 0.16±0.05 | ≤6.00 | 0.34±0.06 |
| Φ14 | 14.5+0.3/-0.1 | 0.16±0.05 | ≤7.00 | 0.34±0.06 |
| Φ15 | 15.5+0.6/-0.1 | 0.16±0.05 | ≤7.50 | 0.34±0.06 |
| Φ18 | 18.7±0.4 | 0.18±0.05 | ≤9.00 | 0.38±0.08 |
| Φ20 | 21.0±0.5 | 0.20±0.05 | ≤10.0 | 0.42±0.08 |
| Φ22 | 23.0±0.5 | 0.20±0.05 | ≤11.0 | 0.42±0.08 |
| Φ25 | 26.0±0.5 | 0.20±0.05 | ≤12.5 | 0.42±0.08 |
| Φ30 | 31.0±0.5 | 0.25±0.08 | ≤15.0 | 0.48±0.08 |
| Φ35 | 36.0±1.0 | 0.25±0.08 | ≤17.5 | 0.48±0.08 |
| Test Items | Test Methods | Performance |
| Temperature Rating | UL224 | 125℃ |
| Length Rate Of Change | ASTM D2671 | -5%~+5% |
| Tensile Strength | ASTM D638 | ≥10.4MPa |
| Breaking Elongation | ASTM D638 | ≥200% |
| Hot Air Aging Test | 158.0℃/168h | – |
| Thermal aging Tensile strength | ASTM D638 | ≥7.3MPa |
| Heat Aging Breaking elongation | ASTM D638 | ≥100% |
| Voltage Level | UL224 | 300V/600V |
| Volume Resistivity | ASTM D2671 | ≥1.0×1012·cm |
| Breakdown Voltage | UL224 | 2500V(60s)No Breakdown |
| Thermal Shock | UL224/250℃±3℃/4h | Does not drip, Does not flow, Does not crack |
| With heart | ASTM D2671 | ≥70% |
| Specification | Dimension before shrinkage (mm) | Dimension after full contraction (mm) | ||
| Diameter (D) | Thickness (T) | Diameter (d) | Thickness (t) | |
| Φ0.6 | 0.8+0.2/-0.1 | 0.15±0.05 | ≤0.35 | 0.25±0.06 |
| Φ0.7 | 0.9+0.2/-0.1 | 0.13±0.05 | ≤0.40 | 0.25±0.06 |
| Φ0.8 | 1.2+0.2/-0.1 | 0.13±0.05 | ≤0.45 | 0.25±0.06 |
| Φ1.0 | 1.3+0.2/-0.1 | 0.13±0.05 | ≤0.60 | 0.25±0.06 |
| Φ1.5 | 2.0+0.2/-0.1 | 0.13±0.05 | ≤0.80 | 0.25±0.06 |
| Φ2.0 | 2.5+0.2/-0.1 | 0.13±0.05 | ≤1.00 | 0.25±0.06 |
| Φ2.5 | 3.0+0.2/-0.1 | 0.13±0.05 | ≤1.25 | 0.28±0.06 |
| Φ3.0 | 3.5+0.2/-0.1 | 0.13±0.05 | ≤1.50 | 0.30±0.06 |
| Φ3.5 | 4.0+0.2/-0.1 | 0.15±0.05 | ≤1.75 | 0.30±0.06 |
| Φ4.0 | 4.5+0.2/-0.1 | 0.15±0.05 | ≤2.00 | 0.30±0.06 |
| Φ4.5 | 5.0+0.2/-0.1 | 0.15±0.05 | ≤2.25 | 0.30±0.06 |
| Φ5.0 | 5.5+0.2/-0.1 | 0.15±0.05 | ≤2.50 | 0.30±0.06 |
| Φ6.0 | 6.5+0.2/-0.1 | 0.15±0.05 | ≤3.00 | 0.30±0.06 |
| Φ7.0 | 7.5+0.3/-0.1 | 0.15±0.05 | ≤3.50 | 0.32±0.06 |
| Φ8.0 | 8.5+0.3/-0.1 | 0.15±0.05 | ≤4.00 | 0.32±0.06 |
| Φ9.0 | 9.5+0.3/-0.1 | 0.16±0.05 | ≤4.50 | 0.34±0.06 |
| Φ10 | 10.5+0.3/-0.1 | 0.16±0.05 | ≤5.00 | 0.34±0.06 |
| Φ12 | 12.5+0.3/-0.1 | 0.16±0.05 | ≤6.00 | 0.34±0.06 |
| Φ14 | 14.5+0.3/-0.1 | 0.16±0.05 | ≤7.00 | 0.34±0.06 |
| Φ15 | 15.5+0.6/-0.1 | 0.16±0.05 | ≤7.50 | 0.34±0.06 |
| Φ18 | 18.7±0.4 | 0.18±0.05 | ≤9.00 | 0.38±0.08 |
| Φ20 | 21.0±0.5 | 0.20±0.05 | ≤10.0 | 0.42±0.08 |
| Φ22 | 23.0±0.5 | 0.20±0.05 | ≤11.0 | 0.42±0.08 |
| Φ25 | 26.0±0.5 | 0.20±0.05 | ≤12.5 | 0.42±0.08 |
| Φ30 | 31.0±0.5 | 0.25±0.08 | ≤15.0 | 0.48±0.08 |
| Φ35 | 36.0±1.0 | 0.25±0.08 | ≤17.5 | 0.48±0.08 |
Previous:
KB-TW(YG)Yellow green shrink tube
Give Us A Message